How to Clean Longboard Bearings?

Published by Tami Thompson on

how to clean longboard bearings

See how to Clean Longboard Bearings here. Longboard bearings are the most basic of all bearings. They were the first bearings to be used and are still commonly used today. They are easily available and relatively inexpensive. They are constructed of a plastic outer shell and a metal hub. The plastic is soft and allows a high amount of friction between the wheel and the bearing, which allows the wheel to spin freely. The plastic acts as a lubricant and keeps the wheel spinning smoothly. To have a smooth longboarding experience, it is important to keep your longboarding bearings clean and functional. How to clean longboard bearings? This article has got your answer.

How to clean longboard bearings?

Longboard bearings should be cleaned depending on how often they are used. If used daily, you must clean them once every 3-4 days and polish them every fortnight. This will help keep their functionality constant and optimal throughout.


How to remove and clean longboard bearings
?

Bearings can be removed easily by turning the bearing counterclockwise. Make sure to turn in small increments. Tighten the bearings by using a bearing wrench evenly. This will ensure that your bearings have the maximum amount of life. When you’re done tightening the bearings, make sure to put them in the bearing casing, but do not twist the bearings.

They can easily be cleaned using a rag, brush, and cleaner.


Best way to clean longboard bearings
?

how to clean longboard bearings

Cleaning longboard bearings will help the bearing to function properly and increase its longevity of the bearing. Here are a few ways to clean your longboard bearings:

Using a scrubbing brush, clean the inside of the bearing using a rag or a toothbrush. Make sure to scrape the inside of the bearing and wipe away the dirt with a rag. Then, use a clean rag to wipe the outside of the bearing. Make sure to wipe from the toothed side to the other, this will help keep your bearing in top condition.

Another way to clean your bearings is to use a bearing polish. This will help clean your bearings and make sure they are functioning at their optimal level.

FAQs: 

1. How to clean and lube skateboard bearings?

Lubricate each bearing by dipping each bearing into the bearing polish. Make sure to spread the oil evenly on each bearing. You can use a rag to spread the oil on the bearings. The oil will help the bearings operate smoothly. Using a bearing grease is also a great way to ensure your bearings are functioning correctly. Make sure the grease is not too thick as a bearing will not function properly. Wipe the grease off of your bearings and make sure the inside of the bearings is completely clean.


2. How often should I clean my longboard bearings?

You should clean your longboard bearings every week if used regularly. This will ensure its longevity.


Tami Thompson

I'm Tami Thompson, the founder of HIR Adventure, my team and I are passionate about outdoor adventure sports. We're committed to offering you the finest skateboards, longboards, and snowboards.